Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, IS Code references, and step-by-step structural calculations across Structural Analysis, Soil Mechanics & Foundation Engineering, Fluid Mechanics & Hydraulics, RCC & Steel Structures, Surveying, Environmental Engineering, and Transportation.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
Which one of the following statements is correct in case of map versus aerial photograph?
If the centrifugal ratio is given and comfort conditions hold good, the length of transition curve $L$ for roads will be
where $R$ is radius.
Which one of the following is an advantage for providing the transition curve on a road?
A double-acting reciprocating pump, running at $40\text{ r.p.m.}$, is discharging $1.0\text{ m}^3$ of water per minute. The pump has a stroke of $400\text{ mm}$. The diameter of piston is $200\text{ mm}$. The delivery and suction head are $20\text{ m}$ and $5\text{ m}$ respectively. The theoretical discharge for the double-acting pump is
The plunge of the fold is
A transition curve should satisfy which of the following conditions?
Select the correct answer.
The total length $L$ of valley transition curve for comfort condition is
where $N$ is deviation angle, $v$ is design speed and $C$ is allowable rate of change of centrifugal acceleration.
For a roadway of $100\text{ km/hr}$ design speed, if the maximum allowable superelevation rate is $0.12$ and the maximum friction coefficient is $0.12$, the minimum radius of curvature will be
The vertical stress $\sigma_z$ under a uniformly distributed circular load based on Boussinesq's theory is
where $p$ is surface pressure, $z$ is depth at which $\sigma_z$ is computed and $a$ is radius of loaded area.
In the CBR method of pavement design, the mixed commercial vehicles with different axle loads are to be converted in terms of the cumulative number of standard axle load $N_S$, using the equation
where $A$ is number of vehicles/day for completed construction for number of lanes, $r$ is annual growth rate of commercial vehicles, $n$ is design life of pavement and $F$ is vehicle damage factor.
In a district where the rainfall is heavy, a major district road of WBM pavement, $3.8\text{ m}$ wide, is to be constructed. The height of the crown with respect to the edges is
If a crossover occurs between two MG parallel tracks of same crossing number $1\text{ in } 12$ with straight intermediate portion between the reverse curves and the distance between the centres of the track is $3.5\text{ m}$, the overall length of the crossover will be nearly
A transition curve of $90\text{ m}$ length is to be used to join the ends of $4^{\circ}$ circular curve within straight and circular curve. The shift value and the offset value at $30\text{ m}$ are respectively, nearly
Which of the following is/are the correct reason(s) to provide the gradient on the railway track?
Select the correct answer.
An exit taxiway for an airport is to be designed. If the turnoff speed is $80\text{ kmph}$ and the coefficient of friction between tire and pavement surface is $0.13$, the radius of the central curve will be nearly
Which of the following is/are the correct characteristic(s) of an ideal elastic fastening?
Select the correct answer.
Which of the following equipments are used for track recording by Indian Railways?
Select the correct answer.
Which one of the following is an important point for an efficient airport vehicular circulation and parking system?
The suitability of an area, as a site for airport terminal building development, is evolved in accordance with
Statement (I) : The water below the water table is known as soil moisture and above the water table as groundwater.
Statement (II) : Extending down from the ground surface, is the soil zone or root zone, which is defined as being the depth of overburden that is penetrated by the roots of vegetation.
Statement (I) : The rainwater collection for direct use can be practiced by collecting the water coming down from the roof into a storage tank of plastic, RCC or masonry.
Statement (II) : In a campus, where sufficient space is not available, the water can be stored in an open excavated pond.
Statement (I) : The soils in nature rarely exist separately as gravel, sand, silt, clay or organic matter.
Statement (II) : The classification or grouping of soils is mainly based on one or two index properties of soil.
Statement (I) : During pile driving, heads, helmets or caps are placed on the top of the pile to receive the blows of the hammer and to prevent damage to the head of the pile.
Statement (II) : Piles are ordinarily driven to a resistance measured by the number of blows required for the last $5\text{ cm}$ of penetration.
Statement (I) : The critical condition of $\text{d/s}$ slope occurs when the reservoir is full and percolation is at its maximum rate.
Statement (II) : The direction of seepage forces tends to increase the stability.
Statement (I) : Dynamic surveying implies some sort of motion. It allows user to move during surveying and to collect data on move.
Statement (II) : Rapid static surveying technique, also known as fast static technique, is much like static surveying except that the occupation times are longer.