Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, IS Code references, and step-by-step structural calculations across Structural Analysis, Soil Mechanics & Foundation Engineering, Fluid Mechanics & Hydraulics, RCC & Steel Structures, Surveying, Environmental Engineering, and Transportation.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
A circular disc $3\text{ m}$ in diameter is held normal to a $26.4\text{ m/s}$ wind of density $1.2\text{ kg/m}^3$. If the coefficient of drag of disc is $1.1$, the force required to hold it at rest will be nearly
The phenomenon of sudden rise in pressure in the pipe is known as
What is the discharge through the venturi flume built in a rectangular channel $1\text{ m}$ wide and having its throat width $0.4\text{ m}$? The upstream head is $0.57\text{ m}$, measured head in throat is $0.5\text{ m}$ and the value of $C_d$ is $1$.
In a long pipe, when the flowing water is suddenly brought to rest by closing the valve or by any similar cause, there will be a sudden rise in pressure. The magnitude of pressure rise depends on
A spherical object of $1.45\text{ m}$ diameter is completely immersed in a water reservoir and chained to the bottom. If the chain has a tension of $5.2\text{ kN}$, the weight of the object when it is taken out of the reservoir into the air will be nearly
A double-acting reciprocating pump having piston area $0.1\text{ m}^2$ has a stroke $0.30\text{ m}$ long. If the pump is discharging $2.4\text{ m}^3$ of water per minute at $45\text{ r.p.m.}$ through a height of $10\text{ m}$, the power required to drive the pump will be nearly
A centrifugal pump is required to lift water to a total head of $40\text{ m}$ at the rate of $50\text{ L/s}$. If its overall efficiency is $62\%$, the power required for the pump will be
Full load is supplied by the turbine shaft when the diameter of jet issuing from the nozzle is $150\text{ mm}$. If the load suddenly drops to $36\%$ of the full load, the jet diameter to regulate the speed will be
What is the delta for a crop when its duty is $864\text{ hectares/cumec}$ on the field (the base period of this crop is $120\text{ days}$)?
Formation of successive bends of reverse order may lead to the formation of a complete 'S' curve called
Which one of the following is the pre-construction measure for silting control in reservoirs?
Which one of the following is a simple and straight forward analytical procedure for computing reservoir capacity and is used as an excellent alternative to mass curve method of determining reservoir capacity?
Which one of the following rivers is a silting river?
Rivers in alluvial flood plains which flow in zig-zag fashion are called
All the methods of calculating crop evapotranspiration involve which one of the following relationships?
where $K_c$ is crop coefficient, $ET_o$ is potential evapotranspiration and $ET_c$ is evapotranspiration of a specific crop.
Which one of the following data is not required for design of a weir or a barrage?
In case of design of a weir or a barrage by providing a higher afflux, the waterway and, therefore, the length of the weir can be reduced, but it will result in
In case of irrigation canal, the seepage losses depend upon
Which one of the following is not the way of alignment of canals?
Which one of the following is one of the objectives of the river training?
While laying or designing the water distribution system, attempts should be made to keep the
Which one of the following factors should be kept in view while fixing the design period for waterworks?
Which one of the following is the function of the Central Board set up by the Government of India for water pollution prevention?
Which of the following measures is/are to be adopted against the water pollution?
Select the correct answer.
Which one of the following is one of the objects of water treatment?