UPSC Engineering Services Examination (ESE) Civil Engineering (CE) Paper-II Technical

UPSC ESE Civil Engineering Solved Papers

Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, IS Code references, and step-by-step structural calculations across Structural Analysis, Soil Mechanics & Foundation Engineering, Fluid Mechanics & Hydraulics, RCC & Steel Structures, Surveying, Environmental Engineering, and Transportation.

0%
Score Tracker
Live accuracy rate
0
Correct
0
Wrong
0
Attempted
Filter ESE Civil Engineering Questions

All ESE Civil Engineering Solved Papers / All Technical Domains / All Chapters

Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).

300 Questions Page 1 of 12
1

Water absorption for burnt clay heavy duty bricks should not be more than :

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
2

The decomposition of felspar is represented as $\text{K}_2\text{O}\cdot\text{Al}_2\text{O}_3\cdot 6\text{SiO}_2 + \text{CO}_2 + n\text{H}_2\text{O} =$

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
3

The metal oxide used to make emerald green glass is:

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
4

Match the following lists:

List-IList-II
P. Cupping1. Caused by wood limbs encased by wood of the tree trunk
Q. Bowing2. Caused by grain irregularities in the board
R. Checks3. Small cracks appearing at the ends of boards due to rapid drying
S. Knots4. Unequal shrinking in the radial and tangential direction

Select the correct answer using the code given below:

OptionPQRS
(a)2413
(b)4231
(c)1243
(d)3214
UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
5

Which one of the following statements is not correct regarding the fineness of cement?

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
6

Match the following lists:

List-I (Types of cement)List-II (Uses)
P. Rapid hardening1. Repair of bridges
Q. Quick-setting2. Dams
R. High alumina3. Concrete under water
S. Low-heat4. Refractory concrete in industries

Select the correct answer using the code given below:

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
7

The approximate composition of $\text{CaO}$ in Portland cement is in the range of:

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
8

The percentage of $\text{MgO}$ in cement is calculated using:

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
9

The minimum value of Modulus of Rupture for Class A lime should be :

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
10

Match the following lists:

List-I (Cement mortar for different works)List-II (Proportion of cement : Sand in mortar)
P. Normal brickwork1. $1 : 4$
Q. Plastering work2. $1 : 3$
R. Grouting cavernous rocks3. $1 : 6$
S. Guniting4. $1 : 1.5$

Select the correct answer using the code given below:

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
11

Which one of the following statements is correct regarding the factors influencing strength of concrete?

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
12

The cement content in a mix design is $378\text{ kg/m}^3$, water content $170\text{ kg}$, sand is $30\%$ of total aggregate, entrapped air is $1\%$, specific gravity of cement, coarse aggregate and fine aggregate are, respectively $3.15$, $2.70$ and $2.60$. The fine aggregate is approximately :

UPSC ESE Prelims 2026 Civil Engineering Paper II Building Materials
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
13

The component of stress acting on infinitesimal element is shown in the figure. Which one of the following statements is not correct?

xyzσzzσzyσzxσyyσyzσyxσxxσxzσxy
UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
14

An element $2\text{ cm}$ long is extended to twice of its initial length and then compressed to its initial length. The engineering strains for the extension and compression are, respectively:

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
15

A rectangular block is subjected to two perpendicular stresses of $10\text{ MPa}$ tension and $10\text{ MPa}$ compression. What are the stresses on planes inclined at $45^{\circ}$ with the horizontal plane?

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
16

An element in plane stress is subjected to normal stresses $p_1 = 120\text{ N/mm}^2$ and $p_2 = 45\text{ N/mm}^2$ (both are tensile stresses) and shearing stress of $30\text{ N/mm}^2$ (simple shear). What is the normal stress ($p_n$) acting on an element rotated through an angle $45^{\circ}$?

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
17

At a point in an elastic material, a direct tensile stress of $70\text{ N/mm}^2$ and a direct compressive stress of $50\text{ N/mm}^2$ are applied on planes at right angles to each other. If the maximum principal stress in the material is limited to $75\text{ N/mm}^2$, what is the maximum shear stress?

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
18

A material has strength in tension, compression and shear as $30\text{ N/mm}^2$, $90\text{ N/mm}^2$ and $25\text{ N/mm}^2$, respectively. If a specimen of diameter $25\text{ mm}$ is tested in compression, then identify the failure load and failure plane.

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
19

A simply supported beam of span $3.0\text{ m}$ has a cross-section $120\text{ mm} \times 180\text{ mm}$. If the permissible stress in the material of the beam is $10\text{ N/mm}^2$, what is the maximum uniformly distributed load (UDL) that it can carry? (Ignore the moment due to self-weight)

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
20

A surveyor's steel tape $30\text{ m}$ long has a cross-section of $15\text{ mm} \times 0.75\text{ mm}$. With this, line $AB$ is measured as $150\text{ m}$. If the force applied during measurement is $120\text{ N}$ more than the force applied at the time of calibration, what is the actual length of the line? (Take the modulus of elasticity for steel as $200\text{ kN/mm}^2$)

UPSC ESE Prelims 2026 Civil Engineering Paper II Surveying Geomatics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
21

The stepped bar shown in the figure is made up of two different materials. Material 1 has Young's modulus $= 2 \times 10^5\text{ N/mm}^2$, while that of Material 2 is $1 \times 10^5\text{ N/mm}^2$. What is the extension of the bar under a pull of $30\text{ kN}$ if both the portions are $20\text{ mm}$ in thickness? (The dimensions shown below are in $\text{mm}$)

P = 30 kNMaterial 1Material 2b1 = 40b2 = 30600800
UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
22

Two parallel walls, $8\text{ m}$ apart, are stayed together by a steel rod of $20\text{ mm}$ diameter passing through metal plates and nuts at each end. The nuts are screwed up to the plates while the bar is at a temperature of $400\text{ K}$. What is the pull exerted by the bar after it has cooled to $300\text{ K}$, if the total yielding at the two ends is $5\text{ mm}$? (Take coefficient of thermal expansion for steel as $12 \times 10^{-6}\text{ per K}$ and Young's modulus of steel as $2 \times 10^5\text{ N/mm}^2$)

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
23

Which one of the following statements is not correct regarding principal stresses and planes?

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
24

What is the maximum torque $T_e$ that can be applied to a solid steel cylindrical shaft $8\text{ cm}$ in diameter, if the shaft is to remain elastic? (Take the elastic limit in shear and the shear modulus as $\tau_0 = 145\text{ MPa}$ and $G = 76\text{ GPa}$, respectively)

UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
25

Given the state of stress $\sigma_x = \sigma_y = -\sigma_0$ (where $\sigma_0 > 0$) and $\tau_{xy} = 0\text{ (zero)}$ as shown in the figure, which one of the following statements is not correct?

(-σ0, 0)R = 0σnτnt
UPSC ESE Prelims 2026 Civil Engineering Paper II Solid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles