Prepare for UPSC Indian Engineering Services (IES/ESE) with verified solutions across Analog & Digital Communications, VLSI & Semiconductor Devices, Signals & Systems, Electromagnetics & Antennas, Microwave Engineering, Control Systems, Computer Organization, and Network Theory.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
For a non-inverting amplifier, the input resistor $R_1 = 1\text{ k}\Omega$ and feedback resistor $R_f = 10\text{ k}\Omega$. The closed-loop voltage gain $A_f$ and feedback factor $\beta$ respectively are
Which one of the following is a three-region reverse-biased junction diode?
Two resistances, one of $30\,\Omega$ and another of unknown value are connected in parallel; the total power dissipated in the circuit is $450\text{ W}$, when the applied voltage is $90\text{ volts}$. The value of the unknown resistance will be
A voltmeter has a resistance of $20000\,\Omega$. When connected in series with an external resistance across a $230\text{ V}$ supply, the instrument reads $160\text{ V}$. The value of the external resistance will be
Which one of the following is not the correct advantage of wound-rotor (or slip-ring) induction motor?
Which one of the following statements is correct regarding an ideal transformer?
A 3-phase, 4-pole, 50 Hz induction motor is running at 1455 r.p.m. The value of the slip will be
The e.m.f. per turn of a single-phase, 10 kVA, 2200/220 V, 50 Hz transformer is 10 V. If the maximum flux density is 1.5 T, the net cross-sectional area of the core will be
A transformer rated 200/50 V, 10 kVA has a core loss of 100 W. If the full-load copper loss is 200 W and lagging power factor is 0.8, the load at maximum efficiency will be nearly
The impedance which transforms from one side of the ideal transformer to the other is in the direct
In which one of the following machines, the field poles are on the stator (and are DC excited) and the rotor constitutes the armature?
A 6-pole synchronous generator driven at 1000 r.p.m. feeds a 4-pole induction motor. If it is loaded to run at a slip of 4%, the motor speed will be:
An 8-pole, lap-wound, DC generator has 1000 armature conductors, a flux of 20 mWb per pole and the e.m.f. generated is 200 V. What is the speed of the machine?
Consider the following statements regarding transformer:
1. It is a device that transfers electric power from one circuit to another.
2. In transformer, the two electric circuits are linked by mutual induction.
Which of the above statements is/are correct?
Whenever a charged particle has an angular momentum, it will contribute to the permanent dipole moment. The following are the contributions to the angular momentum of an atom:
1. Orbital angular momentum of electron
2. Electron spin angular momentum
3. Nuclear spin angular momentum
Which of the above contributions to the angular momentum of an atom are correct?
A substance of FCC lattice is having a molecular weight of 60.2 and density of 6250 kg/m3. If the value of $N$ is $6.02 \times 10^{26}\text{/kg-mole}$, the lattice constant will be:
Steatite is made from:
Which of the following are the important varieties of electrical mica?
The dielectric strength of rubber is 40000 volts/mm at frequency 60 Hz. What is the thickness of insulation on a wire carrying 33 kV to sustain the breakdown?
STM stands for:
An iron rod of 2 m length and $4\text{ cm}^2$ cross-section is in the form of a closed ring. The permeability of the iron ring is $50 \times 10^{-4}\text{ H}\cdot\text{m}^{-1}$. To produce a magnetic flux of $4 \times 10^{-4}\text{ Wb}$, the required ampere-turns will be
When transactions are executing concurrently in an interleaved fashion, then the order of execution of operations from the various transactions is known as
Which one of the following is one of the most popular solutions processing for nanoparticles (mostly oxides) production?
The transition temperature $T_c$ of a superconductor varies with its isotopic mass $M$ as
The 'Cooper pairing' is related to