Prepare for UPSC Indian Engineering Services (IES/ESE) with verified solutions across Analog & Digital Communications, VLSI & Semiconductor Devices, Signals & Systems, Electromagnetics & Antennas, Microwave Engineering, Control Systems, Computer Organization, and Network Theory.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
For mercury of mass number 202, the value of $\alpha$ is 0.5 and $T_c = 4.153\text{ K}$. For the isotope of mercury of mass number 200, the transition temperature is nearly
Which one of the following is not a correct method of obtaining damping?
A 0-25 A ammeter has a guaranteed accuracy of 1% of full-scale reading. If the current measured by this instrument is 10 A, the limiting error will be
The torque of an ammeter is directly proportional to the current flowing through it. A current of 10 A causes a deflection of $60^{\circ}$. When the instrument is spring-controlled, for a deflection of $40^{\circ}$, the value of the current will be nearly
The basic Permanent Magnet Moving Coil (PMMC) instrument mechanism is often called
Which one of the following types of instruments will be used for AC measurements (current, voltage, power and energy)?
In a measurement system, if the force (across) is a measured variable, then its associated variable (power-based) will be:
A coil with a resistance of 5 Ω is connected to the terminals of a Q-meter. Resonance occurs at an oscillator frequency of 8 MHz and resonating capacitance of 150 pF. What is the percentage error introduced by the insertion resistance of 0.1 Ω?
The speed of a 6-pole induction motor supplied at 50 Hz is measured by a stroboscopic method. The neon lamp is supplied from the same source to which the induction motor is connected. The stroboscopic disc has 6 black and 6 white sectors. When the sector appears to be moving at 50 r.p.m., the speed of the induction motor will be:
An accelerometer has a seismic mass of 0.06 kg and a spring constant of 4500 N/m. If the maximum mass displacement is ± 0.025 m (before the mass hits the top), the maximum measurable acceleration will be:
The deflection sensitivity of a CRT is 0.05 mm/V and an unknown voltage applied to the horizontal deflection plates shifts the spot by 5 mm towards the right in the horizontal direction. The unknown applied voltage will be:
A capacitive transducer with its plate separation of 0.05 mm under static conditions has a capacitance of 5 × 10-12 F. For causing a change of capacitance of 0.75 × 10-12 F, the displacement will be nearly:
The input for most of the instrumentation systems is non-electrical. This is converted into an electrical signal by a device called:
Which of the following statements are correct?
1. Cut-set matrix provides a compact and effective means of writing algebraic equations giving branch voltages in terms of tree branches.
2. In cut-set matrix, the number of independent node-pair terminals is equal to the number of tree branches.
3. Tie-set matrix is used to find the branch currents.
Select the correct answer:
Which of the following statements are correct?
1. The end points of a line segment on the junction between two or more branches or the end points of an isolated branch are called nodes.
2. If a sub-graph consists of an ordered sequence of branches, traversing from one node to another, this particular sub-graph is known as path.
3. The closed contour selected in a graph is known as loop.
Select the correct answer:
Which of the following statements are correct?
1. A connected sub-graph of a connected graph having all the nodes of a graph without any loop is known as a tree.
2. The branches of the tree are known as twigs.
3. The branches that are removed from the tree are termed links.
Select the correct answer.
Consider a reduced incidence matrix of a graph:
$$[A] = \begin{bmatrix} 1 & 1 & 0 & 0 & 0 & 1 \\ 0 & -1 & 1 & -1 & 0 & 0 \\ -1 & 0 & -1 & 0 & -1 & 0 \end{bmatrix}$$The number of possible trees will be
The Laplace transform of a function $f(t)$ is defined by
$$L\{f(t)\} = F(s) = \int_{0}^{\infty} f(t)e^{-st}\,dt$$where $s$ is a complex variable given by
In an induction type energy meter, normally the flux due to shunt magnet does not lag the supply voltage exactly by $90^{\circ}$. The reason being that the shunt coil has some resistance. Due to this, the angle of phase is less than $90^{\circ}$, as a result, the torque on the disc is not zero at zero power factor. This type of error is called
Which one of the following statements is not correct regarding moving iron instruments?
If the z-parameters for a network are $z_{11} = 42\,\Omega$, $z_{22} = 35\,\Omega$, $z_{12} = 25\,\Omega$ and $z_{21} = 25\,\Omega$, then the parameters A, B, C and D are respectively
Which one of the following features is not correct for Electronic Voltmeter (EVM)?
In a series R-C circuit, the value of R is $10\,\Omega$ and C is $25\text{ nF}$. A sinusoidal voltage of $50\text{ MHz}$ is applied and the maximum voltage across the capacitance is $2.5\text{ V}$. The maximum voltage across the series combination will be nearly
An impedance $Z_1 = (2 - j5)\,\Omega$ is connected in parallel with another impedance of $Z_2 = (1 + j1)\,\Omega$. If the applied voltage is $17\angle 0^{\circ}\text{ V}$, then the currents through $Z_1$ and $Z_2$ are respectively
The P-N junction diodes and thermistors can be used to compensate for variations in current, thus stabilizing the operating point. Such methods are known as