Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, phasor analysis, and circuit solutions across Electrical Machines, Power Systems, Control Systems, Power Electronics, Network Theory, and Analog & Digital Circuits.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
In a lap winding, there are always as many paths in parallel through the armature winding as there are a number of poles. In such a lap winding, the current in each armature coil is
A four-pole d.c. machine armature has 54 slots. It is lap-wound with single-turn coils. How many armature coils are required?
A shunt d.c. motor is rated for 230 V, 1350 r.p.m., 10 HP, the line current $I_{L}=37.5\text{ A}$ and the field current $I_{f}=0.75\text{ A}$. It is known that the armature resistance $R_{a}=0.35\ \Omega$ and the power dissipated across field winding $P_{\text{fw}}=519\text{ W}$ at rated speed. The shunt d.c. motor is to be equipped with the manually operated variable resistor starter. What is the maximum allowable armature current in starting resistance $R_{\text{st}}$ to assure that the initial armature current does not exceed 150 percent of the rated value?
Which one of the following statements is correct regarding lead or lag compensation?
Consider the following statements for phase margin:
Which of the above statements is/are correct?
Consider the following statements for minimum and non-minimum phase systems:
Which of the above statements are correct?
Consider a system described by
$$\begin{bmatrix} \dot{x}_{1} \\ \dot{x}_{2} \end{bmatrix} = \begin{bmatrix} 1 & 1 \\ -2 & -1 \end{bmatrix} \begin{bmatrix} x_{1} \\ x_{2} \end{bmatrix} + \begin{bmatrix} 0 \text{ (zero)} \\ 1 \end{bmatrix} u$$
$$y = \begin{bmatrix} 1 & 0 \text{ (zero)} \end{bmatrix} \begin{bmatrix} x_{1} \\ x_{2} \end{bmatrix}$$
Which one of the following is correct?
What is the state-transition matrix $\Phi(t)$ of the following system?
$$\begin{bmatrix} \dot{x}_{1} \\ \dot{x}_{2} \end{bmatrix} = \begin{bmatrix} 0 \text{ (zero)} & 1 \\ -2 & -3 \end{bmatrix} \begin{bmatrix} x_{1} \\ x_{2} \end{bmatrix}$$
In the system shown in the figure, the numerical values of $m$, $b$ and $k$ are given as $m=1\text{ kg}$, $b=2\text{ N-sec/m}$ and $k=100\text{ N/m}$. The mass is displaced 0.05 m and released without initial velocity. What is the frequency observed in the vibration, if the displacement $x$ is measured from the equilibrium position?
A feedback control system is shown in the figure. What is the value of $K$ for unit ramp input so that the system will have damping ratio of 0.5?
Consider the following network:
$$G(s)=\frac{s+\frac{1}{T_{1}}}{s+\frac{1}{T_{2}}}$$
Which of the following conditions is/are correct?
Select the correct answer using the code given below.
Consider the system shown in the figure. What is the value of $a$ such that the damping ratio of the dominant closed poles is 0.5?
Consider the closed-loop system shown in the figure. What is the critical value of $K$ for stability by the use of the Nyquist stability criterion?
In the feedback control system shown in the figure, $D(s)$ is step disturbance, $R(s)$ is input and $C(s)$ is output:
The steady-state error component due to a step disturbance for the system is
Consider the following statements related to steady-state error for a control system:
Which of the above statements are correct?
What is the z-transform of discrete-time unit step signal $u(n)$?
Consider the following statements for quarter-wave symmetry:
A periodic function possesses a quarter-wave symmetry, if
Which of the above statements is/are correct?
What is the inverse discrete-time Fourier transform of the frequency domain representation shown in the figure?
What is the solution for aperiodic signal $x(t)$ as shown in the figure?
For discrete-time sinc function, what is the inverse discrete-time Fourier transform of the function as shown in the figure?
What is the Fourier transform $G(\omega)$ of the signal of $g(t)=\frac{1}{1+jt}$?
What is the convolution of the following two signals?
| Signal | Mathematical Expression |
|---|---|
| Input Signal $$x(t)$$ | $$x(t) = \begin{cases} 1, & -1 < t < 1 \\ 0\text{ (zero)}, & \text{elsewhere} \end{cases}$$ |
| Impulse Response $$h(t)$$ | $$h(t) = \delta(t+1) + 2\delta(t+2)$$ |
What is the bilateral z-transform of the signal $x(n)=a^{n+1}u(n+1)$?
Which one of the following statements is not correct for convolution?
The sampling frequency of the signal $g(t)=\text{sinc}^{2}(200t)$ is