Prepare for UPSC Indian Engineering Services (IES/ESE) with verified solutions across Analog & Digital Communications, VLSI & Semiconductor Devices, Signals & Systems, Electromagnetics & Antennas, Microwave Engineering, Control Systems, Computer Organization, and Network Theory.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
An audio signal comprising of a single sinusoidal term $s(t) = 3 \cos(2\pi 1000t)$ is quantized using DM. What is the signal-to-quantization noise ratio?
The number of quantization levels is increased from 4 to 64. The bandwidth required for the transmission of a PCM signal increases by a factor of:
By considering standard notations, the transfer function of a tachometer is of the form:
The open-loop DC gain of a unity negative feedback system with closed-loop transfer function $\frac{s+4}{s^2+7s+13}$ is:
A second-order system has a transfer function given by $G(s) = \frac{25}{s^2+8s+25}$. If the system, initially at rest, is subjected to a unit-step input at $t=0\text{ (zero)}$, the second peak in the response will occur at:
A second-order system has a closed-loop transfer function given by $G(s) = \frac{25}{s^2+8s+25}$. The settling time for 5 percentage band in tolerance error is:
The output of a standard second-order system for a unit-step input is given as $y(t) = 1 - \frac{2}{\sqrt{3}}e^{-t}\cos\left(\sqrt{3}t - \frac{\pi}{6}\right)$. What is the transfer function of the system?
Consider a causal second-order system with the transfer function $G(s) = \frac{1}{s^2+2s+1}$ with a unit-step $R(s) = \frac{1}{s}$ as an input. Let $c(s)$ be the corresponding output. The time taken by the system output $c(t)$ to reach 94% of its steady-state value $\lim_{t\to\infty}c(t)$, rounded off to two decimal places, is:
Non-minimum phase transfer function is defined as the transfer function:
A system has poles at 0.01 Hz, 1 Hz and 80 Hz; zeros at 5 Hz, 100 Hz and 200 Hz. The approximate phase of the system response at 20 Hz is:
The magnitude of frequency response of an underdamped second-order system is 5 at 0 (zero) rad/sec and peaks at $\frac{10}{\sqrt{3}}$ at $5\sqrt{2}\text{ rad/sec}$. The transfer function of the system is:
By considering standard notations, the peak value of the magnitude in the resonant peak $M_r$ is:
The phase margin of a system having the loop transfer function $G(s)H(s) = \frac{2\sqrt{3}}{s(s+1)}$ is:
The phase margin of a system with the open-loop transfer function $G(s)H(s) = \frac{1-s}{(s+1)(s+2)}$ is:
What is the overall number of Clock cycles Per Instruction (CPI) for a machine A for which the following performance measures were recorded when executing a set of benchmark programs? (Assume the clock rate of the CPU as 200 MHz and execution of 100 instructions)
| Instruction category | Percentage of occurrence | No. of cycles per instruction |
|---|---|---|
| ALU | 38 | 1 |
| Load and store | 15 | 3 |
| Branch | 42 | 4 |
| Others | 5 | 5 |
What is the number of bits in the main memory address for a memory system having the following specification?
Size of the main memory is 4K blocks, size of the cache is 128 blocks and the block size is 16 words
(Assume that the system uses set-associative mapping with four blocks per set)
Consider the following reference string of pages made by a processor:
4, 7, 5, 7, 6, 7, 10, 4, 8, 5, 8, 6, 8, 11, 4, 9, 5, 9, 6, 9, 12, 4, 7, 5, 7
Assume that the number of page frames allocated in the main memory is four. What is the number of page faults generated using Least Recently Used (LRU) replacement technique?
Which one of the following is correct with respect to short-term scheduling?
Which one of the following statements is correct with respect to bounded buffer in shared memory systems?
Which one of the following is relevant to non-preemptive kernels?
Which one of the following is used to perform a transfer between two memory-mapped devices without the intervention of the CPU or the use of main memory?
Consider the division of a dividend $X = 0100000$ and a divisor $D = 0110$. Then the quotient (Q) and the remainder (R) respectively are:
Which one of the following threats is used to facilitate the designer of a program or system which might leave a hole in the software that only he/she is capable of using?
Windows keeps much of its configuration information in internal databases called:
Which one of the following is a drawback of Programmed and Interrupt-Driven I/O?