Prepare for UPSC Indian Engineering Services (IES/ESE) with verified solutions across Analog & Digital Communications, VLSI & Semiconductor Devices, Signals & Systems, Electromagnetics & Antennas, Microwave Engineering, Control Systems, Computer Organization, and Network Theory.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
What are the values of voltage gain, input and output impedances respectively with voltage series feedback having
$A$ (gain without feedback) $=-100$
$R_{i}$ (input impedance without feedback) $=10\text{ k}\Omega$,
$R_{o}$ (input impedance without feedback) $=20\text{ k}\Omega$,
$\beta$ (feedback) $=-0\cdot1$?
The frequency of practical FET Colpitts oscillator can be found by
Consider the following statements:
1. Smoke test is a non-exhaustive test to ensure that the crucial requirements for the product are functioning.
2. Sanity testing is superficial testing performed to test the durability of the product.
3. Scalability test is used to test the performance aspects of the product after integration.
Which of the above statements are not correct?
Consider the following statements regarding the VLSI design:
1. Parallelism and pipelining have been effective ways to reduce power consumption.
2. Replacing a single functional unit with an N-stage pipelined unit reduces the amount of logic in a clock cycle at the expense of more registers.
3. When leakage is unimportant, parallelism offers a slight edge because the multiplexer has less overhead than the pipeline registers.
Which of the above statements are correct?
Consider the following statements:
1. The general formula for the minimum possible sampling rate for a bandpass signal can be recovered from the samples
$$f_{s} = \frac{2f_{h}}{\text{Largest integer not exceeding } \frac{f_{h}}{f_{h}-f_{l}}}$$
2. If we sample at a rate higher than twice the highest frequency, the aliases do not overlap and the original signal can be recovered.
3. The absolute minimum sampling rate in most favourable situation is twice the highest frequency, not the bandwidth of the signal.
Which of the above statements are correct?
The recursive system described by a linear constant-coefficient difference equation is
What is the input signal $x(n)$ that will generate the output $y(n)=\{1,5,10,11,8\}$ for a system with impulse response $h(n)=\{1,2,1\}$?
The convolution sum is used to give the response of
If $x(n)$ is a periodic signal with fundamental period N and takes infinite values, then it is
What is the particular solution of the difference equation $y(n)=\frac{5}{6}y(n-1)-\frac{1}{6}y(n-2)+x(n)$, when the forcing function $x(n)=2^{n},$ $n\ge0$ and zero elsewhere?
If in an n-bit carry skip adder divided into M blocks, each block is containing P adder cells, then, the total (worst case) propagation delay time is given by ($k_{1}$ denotes the time needed by the carry signal to propagate through the adder cell, $k_{2}$ denotes the time needed for a carry to skip over a block)
In MOS transistor, the depletion region width d for the junction is ($\epsilon_{si}=$ relative permittivity of silicon, $\epsilon_{0}=$ permittivity of free space, $V=$ effective voltage across the junction, $q=$ electron charge, $N=$ doping level of substrate)
Consider the following statements regarding the instruction pipelining:
1. It is used for increasing the efficiency of the advanced microprocessors.
2. Pipelining a processor means breaking down its instruction into a series of discrete pipeline stages which can be completed in sequence by specialized hardware.
3. The performance and programming simplification is achieved by pipelining operation with the elimination of pipeline interlocks and the control of pipeline is simplified.
Which of the above statements are correct?
Sample $x(t)$ at the rate of 10 samples per second. What is the ROC of its z-transform directly from $x(n)$ if the input signal $x(t)=[-2e^{-3t}+3e^{-4t}]u(t)$?
Matched-z transformation method is used to design
How many m-bit data words can be stored using an n-input, m-output programmable read only memory?
How many numbers of unique states are possible in twisted ring counter with 5 flip flops?
Essential prime implicants of the given K-map are
A 12-stage counter is operating a 12-stage ladder network using a reference voltage of 10 V. If a clock rate of 1 MHz is operating a 12-stage counter, then the maximum conversion time (approximately) is
Minimized function of the Boolean function $f(A,B,C,D)=\Sigma M(2,3,4,5,7,8,10,13,15)$ is
IC 74157 is a
When implementing $F(A,B,C)=AB+\overline{B}C$ with $4:1$ multiplexer, the correct input sequence of multiplexer's input $D_{0}$, $D_{1}$, $D_{2}$ and $D_{3}$ are respectively
IC 74273 is for
Consider the following statements regarding the sequential circuit:
1. The Moore model sequential circuit is called transition-assigned circuit.
2. In the Mealy model sequential circuit, the output is associated with the state transitions, that is, the arcs in the state diagram.
3. In the Moore model sequential circuit, outputs are the functions of both, the inputs and the present state.
Which of the above statements are not correct?
Consider the following statement regarding the Programmable Array Logic (PAL):
1. A PAL comprises programmable AND and OR array.
2. Unlike a PROM, in which all $2^{n}$ possible products of n variables are generated, a PAL generates only a limited number of product terms, leaving it to the designer to select those products to be generated for each sum.
3. The overall cost of a PAL is considerably lower than that of comparable PROMs and FPLAs.
Which of the above statements are correct?