Prepare for UPSC Indian Engineering Services (IES/ESE) with verified solutions across Analog & Digital Communications, VLSI & Semiconductor Devices, Signals & Systems, Electromagnetics & Antennas, Microwave Engineering, Control Systems, Computer Organization, and Network Theory.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
For the typical transistor amplifier in the active region, $V_{\text{CE}}$ is usually about
Consider the following statements regarding the BJT:
1. $\beta$ decreases with decrease in temperature.
2. $|V_{\text{BE}}|$ decreases about 2.5 mV per degree Celsius increase in temperature.
3. Reverse saturation current doubles in value for every $20^{\circ}\text{C}$ increase in temperature.
Which of the above statements is/are not correct?
A non-uniform electric field is given by $\vec{E} = y\vec{a}_{x} + x\vec{a}_{y} + 2y\vec{a}_{z}\text{ V/m}$. A charge of 2 C is transferred from point $A(1, 0, 3)$ to point $B(2, 1, 3)$ along the straight line from point A to point B. What is the work done?
The differential magnetic field at any point is proportional to the product of the current, differential length and the sine of the angle between the element and the line joining to that point. This is known as
A potential difference of 10 V is maintained across the ends of a copper wire 2 m in length. If the mean time between collisions is $2.7\times10^{-14}\text{ s}$, then what is the drift velocity of the free electrons ?
In the international system of units (SI), charges $Q_{1}$, $Q_{2}$ are expressed in Coulombs, distance R in meters, and the force in Newtons. The constant of proportionality k is
Which one of the following does not indicate the space pervasiveness of electromagnetic effects?
Which one of the following points is not related to Poynting's Theorem?
Which one of the following is not applicable to Channel guides ?
What is the radiation resistance of an infinitesimal dipole whose overall length $l=\lambda/50$ ?
When two antennas are near each other, some of the energy that is primarily intended for one ends up at the other. The amount does not depend on
Match the following lists:
| List-I | List-II |
|---|---|
| P. Cavity-backed printed antennas | 1. Difficult to make conformal |
| Q. Triplate | 2. Low efficiency |
| R. Waveguide | 3. Narrow bandwidth |
| S. Microstrip antennas | 4. Coupling occurs inside structure |
Select the correct answer using the code given below:
Which one of the following properties is not correct for skin depth ?
A slot antenna of dual monopole feed has
Consider the following statements regarding the antenna arrays:
1. A broadside array has its maximum radiation directed along the axis of the array.
2. An end-fire array has its maximum radiation directed along the axis of the array.
3. The resultant pattern for an array, which is known as pattern multiplication, is the product of the unit pattern and the group pattern.
Which of the above statements is/are correct?
The capacitor in the figure given below is uncharged. The switch is moved to position 1 for 5 ms, then to position 2 and left there. What is the current $(i_{\text{C}})$ while the switch is in position 2?
Which one of the following digital logic families has the worst noise immunity and power dissipation among all the digital logic families?
The quiescent point (Q-point) of the BJT is selected in such a way that the gain of the BJT is
What are the stability factor $S(V_{\text{BE}})$ and the change in collector current $I_{\text{C}}$, respectively, from $25^{\circ}\text{C}$ to $100^{\circ}\text{C}$ for the emitter-bias transistor configuration with $R_{\text{B}} = 240\text{ k}\Omega$, $R_{\text{E}} = 1\text{ k}\Omega$ and $\beta = 100$? (Take the change in voltage $V_{\text{BE}}$ due to change in temperature to be $-0.17\text{ V}$)
An amplifier without any feedback has midband gain of 1000, lower 3 dB frequency $f_{1} = 5\text{ kHz}$ and upper 3 dB frequency $f_{2} = 50\text{ kHz}$. If a voltage series negative feedback with feedback factor of 0.1 is used in the amplifier, then the lower and upper 3 dB frequencies of the resultant amplifier are respectively
What are the input and output impedances respectively with feedback for current series feedback having $A = -200$, $R_{\text{i}} = 15\text{ k}\Omega$, $R_{\text{o}} = 25\text{ k}\Omega$ for feedback factor of $-0.25$?
Consider the following statements:
1. In the gated S-R latch, for the $S=R=0\text{ (zero)}$, the latch output does not change.
2. In J-K flip-flop, during the interval $J=1$, $K=0\text{ (zero)}$ and $E=0\text{ (zero)}$ flip-flop will be reset.
3. Latches and flip-flops both are basically the bistable elements.
Which of the above statements are correct?
In a 4-bit serial in serial out (shift right mode) shift register using D flip-flops (negative edge triggered) all the flip-flops initially are in reset condition, i.e. $Q_{3}Q_{2}Q_{1}Q_{0}=0000$. The number of negative edges required to store the binary bit 1110 are
Function $f(a,b,c)=ab+\overline{b}c$ is implemented using 4:1 multiplexer. If a and b are considered as select lines and 'c' as an input to multiplexer, then what are the values of $D_{0}$, $D_{1}$, $D_{2}$, $D_{3}$?
Consider the following statements regarding the BJT and FET:
1. BJT is a voltage-controlled device and FET is a current-controlled device.
2. In both BJT and FET, the output current is the controlled variable.
3. Due to high input characteristics of FETs, the ac equivalent model is somewhat complex than that employed for the BJTs.
Which of the above statements is/are not correct?