Prepare for UPSC Indian Engineering Services (IES/ESE) with verified solutions across Analog & Digital Communications, VLSI & Semiconductor Devices, Signals & Systems, Electromagnetics & Antennas, Microwave Engineering, Control Systems, Computer Organization, and Network Theory.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
Which one of the following methods requires saving the value of the CPU registers from the thread being switched out and restoring the new thread being scheduled?
A parallel-plate air-filled capacitor has plate area of $10^{-4}\text{ m}^2$ and plate separation of $10^{-3}\text{ m}$. It is connected to a 0.5 V, 4.5 GHz source. The magnitude of the displacement current is (take $\epsilon_0 = \frac{1}{36\pi \times 10^9}\text{ F/m}$):
A coaxial cable with an inner diameter of 1 mm and outer diameter of 2.4 mm is filled with a dielectric of relative permittivity 10.89. Given $\mu_0 = 4\pi \times 10^{-7}\text{ H/m}$ and $\epsilon_0 = \frac{1}{36\pi \times 10^9}\text{ F/m}$. The characteristic impedance of the cable is:
The electric field of a uniform plane electromagnetic wave in free space, along the positive x direction, is given by $\overline{E} = 10(a_y + ja_z)e^{-j25x}$. The frequency and polarization of the wave respectively are:
In electromagnetic field, which one of the following does not satisfy the wave equation?
The intrinsic impedance of copper at high frequency is:
The depth of penetration of a wave in a lossy dielectric increases with increasing:
Which one of the following can wave propagate in a conducting medium before its amplitude becomes insignificant?
Copper behaves as a:
A transmission line has a characteristic impedance of $50\;\Omega$ and a resistance of $0.1\;\Omega/\text{m}$. If the line is distortionless, the attenuation constant is:
The VSWR can have any value between:
Which of the following modes has the solution of $H_z = 0\text{ (zero)}$, but $E_z \ne 0\text{ (zero)}$?
Consider the following statements regarding impedance matching:
Which of the above statements are correct?
What is a four-line to two-line priority encoder with active HIGH inputs and outputs, with priority assigned to the higher-order data input line?
How many flip-flops are required to build a binary counter that counts from 0 (zero) to 4095?
A 2-bit binary multiplier can be implemented using:
For a binary half subtractor having two inputs A and B, the correct set of logical expressions for the outputs D (difference) and X (borrow) is:
Which one of the following statements is correct?
Each cell of a static random access memory contains:
The following sequence of instructions is executed by an 8085 microprocessor:
1000 H LXI SP, 27FF H 1003 H CALL 1006 H 1006 H POP H
The contents of the stack pointer (SP) and the HL register pair on completion of execution of these instructions are:
The total number of memory accesses involved when an 8085 processor executes the instruction LDA 2003 H is:
The contents of register (B) and accumulator (A) of an 8085 microprocessor are 3C H and 89 H respectively. The contents of A and the status of carry flag (CY) and sign flag (S) after executing SUB B instructions are:
For an 8085 microprocessor, the following program is executed:
MVI A, 05 H
MVI B, 05 H
PTR: ADD B
DCR B
JNZ PTR
ADI 03 H
HLTAt the end of the program, accumulator contains:
Let $x_a(t)$ be an analog signal with bandwidth $B = 6\text{ kHz}$. We wish to use an $N = 2^m$ point DFT to compute the spectrum of the signal with resolution less than or equal to 200 Hz. What is the minimum length of the analog signal recorded?
The z-transform of the impulse response of a causal LTI system is $H(z) = \frac{1}{2}\frac{z^{-1}}{z^{-2} - 4.5z^{-1} + 5}$. What is an input $x(n)$ that would produce the output $y(n) = u(-n) + (0.5)^n u(n)$?