Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, phasor analysis, and circuit solutions across Electrical Machines, Power Systems, Control Systems, Power Electronics, Network Theory, and Analog & Digital Circuits.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
A carrier signal having 10 V peak amplitude is amplitude modulated by three different modulating frequencies with peak amplitude levels of 2 V, 3 V and 4 V respectively. The modulation index of the resultant complex AM signal will be nearly
An AC signal having constant amplitude of 10 V, but variable frequency is applied across a simple low-pass R-L circuit with a cut-off frequency of 1 kHz. If R is $1\text{ k}\Omega$, the value of L will be nearly
It is desired to design a microcontroller-based periodic signal generator with minimum and maximum time period specifications of 125 ns and 100 ms. Then the system clock frequency will be
An amplitude modulated amplifier has a radio frequency output of 50 W at 100% modulation. If the internal loss in the modulator is 10 W, the unmodulated carrier power will be
The maximum deviation allowed in an FM broadcast system is 75 kHz. If the modulating signal is a single-tone sinusoid of 10 kHz, the bandwidth of the FM signal will be
The Peak Envelope Power (PEP) in suppressed carrier signal is
An open-circuit noise voltage generated across a $100\text{ k}\Omega$ resistor over a frequency range of direct current to 20 kHz at room temperature of $25^\circ\text{C}$ will be nearly
A voice signal band limited to 3-4 kHz is sampled at 8 kHz and pulse code modulated using 64 quantization levels. If ten such signals are time division multiplexed using one 5-bit synchronizing word, the minimum channel bandwidth will be
Six analog information signals, each band limited to 4 kHz, are required to be time division multiplexed and transmitted by a TDM system. The minimum transmission bandwidth of the PAM/TDM channel will be
By applying the time-shifting property, what is the z-transform of the following signal?
$$X(z)=\frac{z^{-1}}{1-3z^{-1}}$$
The relationship between the unit step and delta function is
Which one of the following time signals is said to be periodic with period $T_p$ for which the signal is advanced in time and hence it remains unchanged?
Consider a continuous-time system with input $x(t)$ and output $y(t)$:
$$y(t) = x(\sin t)$$
The system is
In the Fourier series representation, the condition for the even symmetry is
Consider that the signal
$$x_a(t) = 10\cos 2\pi(1000)t + 5\cos 2\pi(5000t)$$
is to be sampled. The Nyquist rate is
The Fourier transform of unit step function $u(t)$ is
Consider the following signals:
$$x_1(t) = 10\cos(100\pi t); \quad x_2(t) = 10\cos(50\pi t)$$
If both are sampled at $f_s = 75\text{ Hz}$, the sampled signals $x_1(n)$ and $x_2(n)$ are
When the Fourier transform and inverse transform equations are similar but not quite identical, then this symmetry leads to a property called
Consider $H_a(s) = \frac{1}{(s+1)^2}$ and $T=0.1\text{ s}$. Using bilinear transformation, $H(z)$ is
Which one of the following systems can be represented by the given general difference equation?
$$y(n) = -\sum_{k=1}^N a_k y(n-k) + \sum_{k=1}^N b_k x(n-k)$$
What is the convolution of the given two sequences?
$$x(n) = e^{-n^2}, \text{ for all } n \quad \text{and} \quad h(n) = 3n^2, \text{ for all } n$$
For type 2 system with unit ramp input, the steady-state error $e_{ss}$ is
A transfer function of a linear time-invariant system is defined to be the ratio of the Laplace transform of
For a unity feedback control system, the forward path transfer function is given by
$$G(s) = \frac{10}{(0.5s + 1)(s + 5)}$$
The position and velocity error constants for this system will be respectively
A system is described by the differential equation
$$3\frac{d^2 c(t)}{dt^2} + 5\frac{dc(t)}{dt} + c(t) = r(t) + 3r(t-2)$$
The transfer function of the system is