Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, phasor analysis, and circuit solutions across Electrical Machines, Power Systems, Control Systems, Power Electronics, Network Theory, and Analog & Digital Circuits.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
A 3-phase, 10000 kVA, 11 kV alternator has a sub-transient reactance of 8%. If 3-phase short circuit occurs at its terminals, the fault power will be nearly
The operating time t of a static time-current relay is
A uniformly distributed load on a distributor of length 500 m is rated at $1\text{ A/m}$ length. The distributor is fed from one end at 220 V. If the loop resistance is $2\times 10^{-5}\,\Omega\text{/m}$, the voltage drop at a distance of 400 m from the feeding point will be
Which one of the following distributors is having greater reliability and better flexibility?
An existing DC three-wire system is to be converted into a 3-phase, 4-wire system by adding a fourth wire equal in cross-section to each outer wire of the DC system. For the same supply and load voltages to neutral and balanced conditions, the extra power at unity power factor that can be supplied by the AC system will be
Which of the following statements are correct for load flow?
Select the correct answer.
Fixed and semi-fixed costs being independent of the amount of energy generated are also called
R, L and C in an SCR circuit meant for protecting against $\frac{dv}{dt}$ and $\frac{di}{dt}$ are $4\,\Omega$, $6\,\mu\text{H}$ and $6\,\mu\text{F}$ respectively. If the supply voltage is 300 V, the maximum permissible value of $\frac{di}{dt}$ is
A 3 kV, 750 A power electronics circuit has thyristors with 800 V and 175 A rating. If the derating is of 25%, the number of thyristors in series will be
Depending on the design principles used, gating circuits are very essential to direct
Which one of the following commutated converters is working on the principle of natural commutation?
In a single-phase full-wave controlled rectifier circuit with midpoint configuration, two SCRs (M-2) and
The reverse recovery current of a power diode is $10\,\mu\text{s}$ and the rate of fall of current is about $200\text{ A/}\mu\text{s}$. What is the storage charge?
The advantageous feature of AC drives with a current source DC link converter is
When an AC main is ON, the rectifier circuit will supply the power to the inverter as well as to the battery, therefore, it acts as a
Based on the use of resonant tank, the resonant converters are classified as
Select the correct answer.
If resonant elements are added to the DC-DC converters, then the resulting converters are known as
The resonant technique processes power in sinusoidal form. The power switches are often turned off under
DC to DC converters basically consist of two conversion stages, namely
Statement (I): If the capacitance of an overhead line is high, the line draws more charging current, which compensates or cancels the lagging component of load current.
Statement (II): The resultant current flowing in the line is reduced.
Select the correct answer using the codes given below:
Statement (I): Voltage control and reactive power control are interrelated and need to be therefore considered together.
Statement (II): The voltage variation at a load is an indication of the unbalance between the reactive power generated and absorbed by that load.
Select the correct answer using the codes given below:
Statement (I): BIBO stands for Bounded Input Bounded Output. The meaning of the word 'bounded' is some finite value.
Statement (II): A system is said to be stable, if it follows 'BIBO principle', i.e., every bounded input produces bounded output.
Select the correct answer using the codes given below:
Statement (I): Insulation resistance falls with increase in temperature; in some cases, there is a marked decrease in insulation resistance.
Statement (II): The resistivity of the insulator is considerably lowered in the presence of moisture.
Select the correct answer using the codes given below:
Statement (I): A computer's control unit does not perform any actual processing of jobs, but acts as the central nervous system for other components of the computer systems.
Statement (II): It obtains instructions from a program stored in main memory, interprets the instructions and issues signals causing other units of the system to execute them.
Select the correct answer using the codes given below:
Statement (I): The resistivity of ferrites is very much higher than that of ferromagnetic metals.
Statement (II): The ferrites are chemical compounds and electrons in them are subject to restraint of valence forces.
Select the correct answer using the codes given below: