Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, phasor analysis, and circuit solutions across Electrical Machines, Power Systems, Control Systems, Power Electronics, Network Theory, and Analog & Digital Circuits.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
The steady-state errors for type 1, type 2 and type 3 systems with parabolic input are respectively
The Laplace transform of the function
$$f(t) = t^n e^{-at}$$
is
If any root of the characteristic equation has a positive real part or if there is a repeated root on the $j\omega$-axis, the system is
Consider the unity feedback system given by
$$G(s) = \frac{1}{(s+1)^2}$$
The phase margin is
For the system having open-loop transfer function
$$G(s)H(s) = \frac{K}{s(s+2)(s+3)}$$
the breakaway point is nearly
A mathematical abstraction to represent or model the dynamics of a system utilizes three types of variables called
If it is possible to transfer the system state from any initial state $x(t_0)$ to any other desired state $x(t_f)$ in specified finite time by a control vector $u(t)$, the system is said to be completely
If every state $x(t_0)$ can be completely identified by measurements of the output $y(t)$ over a finite time interval, the system is said to be completely
If the output voltage in autotransformer is less than the input voltage,
The maximum field circuit resistance (for a given speed) with which the shunt generator would just excite is known as its
The speed at which the rotating magnetic field revolves is called
A shunt generator is rated at 240 V full load. At no load, the voltage is 252 V. The voltage regulation will be
When a compound generator has its series field flux aiding its shunt field flux, the machine is said to be
The load torque developed by synchronous motor at which the motor pulls out of the synchronism is called
A 6-pole, 3-phase induction motor is connected to a 50 Hz supply. If it is running at 970 r.p.m., the slip will be
The stator of a 3-$\phi$ induction motor has 3 slots per pole per phase. If the supply frequency is 50 Hz, the speed of the rotating stator flux will be
The graph between armature current ($I_a$) and field current ($I_f$) of a synchronous motor for a constant load is called
In salient-pole machines, the resultant air gap flux is increased as in a cylindrical rotor alternator when armature reaction flux $\phi_a$ for $\Psi=90^{\circ}$
A stepper motor has a step angle of $10^\circ$ and is required to rotate at 200 r.p.m. The pulse rate of the motor will be
A four-stack VR stepper motor has a step angle of $1\cdot 8^\circ$. The number of its rotor teeth will be
Which one of the following power plants is suitable for supplying peak loads?
The specific rotational speed ($N_s$) for a water turbine is
A steam power station of 100 MW capacity uses coal of calorific value of $6400\text{ kcal/kg}$. The thermal efficiency of the station is 30% and electrical generation efficiency is 92%. When the station is working at full load, the coal required per hour will be nearly
The insulation resistances $R_1$ and $R_2$ of a live 2-wire network are measured by earthing each main in turn through a milliammeter in series with a high resistance r. When the supply voltage is 500 V, the values of $r=2000\,\Omega$, $i_1=1\text{ mA}$ and $i_2=0.5\text{ mA}$, the insulation resistances $R_1$ and $R_2$ respectively are
The advantages of supercritical steam power plants are
Which of the above advantages are correct?