Prepare for UPSC Indian Engineering Services (IES/ESE) with verified solutions across Analog & Digital Communications, VLSI & Semiconductor Devices, Signals & Systems, Electromagnetics & Antennas, Microwave Engineering, Control Systems, Computer Organization, and Network Theory.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
What is the output voltage $V_{0}$ for the network given below ?
Consider the following statements:
1. The gain margin is defined as the value of $A\beta$ in decibels at the frequency at which the phase angle of $A\beta$ is $\pi$ radian.
2. The phase margin is $180^{\circ}$ minus the magnitude of the angle of $A\beta$ at the frequency at which $|A\beta|$ is 0 (zero).
3. Oscillations will be sustained if, at the oscillator frequency, the magnitude of the product of the transfer gain of the amplifier and the magnitude of the feedback factor of the feedback network (the magnitude of the loop gain) is less than unity.
Which of the above statements are not correct?
Consider the following statements regarding a Gaussian process:
1. If a Gaussian process is wide sense stationary, then the process is not stationary in the strict sense.
2. If the Gaussian process $X(t)$ is applied to a stable linear filter, then the random process $Y(t)$ developed at the output of the filter is also Gaussian.
3. If the random variables $X(t_{1}), X(t_{2}), \dots, X(t_{n})$, obtained by sampling a Gaussian process $X(t)$ at times $t_{1}, t_{2}, \dots, t_{n}$ are uncorrelated, then these random variables are not statistically independent.
Which of the above statements is/are correct?
Consider the following statements regarding information theory:
1. The information capacity of a continuous channel of bandwidth $B\text{ Hertz}$, perturbed by additive white Gaussian noise of power spectral density $N_{0}/2$ and limited in bandwidth to $B$, is
$$C = B\log_{2}\left(1 + \frac{P}{N_{0}B}\right)\text{ bits per second}$$, where $P$ is the average transmitted power.
2. The mutual information is always non-negative.
3. The mutual information of a channel is symmetric.
4. The mutual information of the channel is related to the joint entropy of the channel input and channel output by $I(x,y) = H(x) - H(y) + H(x,y)$.
Which of the above statements are correct?
Consider the following statements regarding the communication system:
1. The baseband signal contains frequencies in the audio frequency range, some form of frequency-band shifting must be employed for the radio communication system to operate properly.
2. Digital repeaters reconstruct the received digital data by minimizing the effect of signal attenuation and distortion. Thus channel noise is not cumulative.
3. A digital signal can be propagated through a limited distance only, otherwise higher signal attenuation can introduce unacceptable errors.
Which of the above statements are correct?
Which one of the following mid-band frequency of IF section is used in FM radio?
Consider the following statements:
1. DSB-SC, SSB and VSB are examples of linear modulation.
2. DSB-SC modulation is well suited for point-to-point communication.
3. SSB-SC modulation scheme is less affected by frequency selective fading.
Which of the above statements is/are correct?
Which one of the following schemes is used for transmission of the video signal in commercial television broadcasting?
A high resolution black and white TV picture consists of about $2\times10^{6}$ picture elements and 16 different brightness levels. Pictures are repeated at the rate of 32 per second. All picture elements are assumed to be independent and all levels have equal likelihood of occurrence. The average rate of information conveyed by this TV picture source is
A carrier is frequency modulated with a sinusoidal signal of 2 KHz, resulting in a maximum frequency deviation of 5 KHz. The bandwidth of the modulated signal is
If, in addition to being stationary, the random process is also ergodic in nature, then the relation between power content $P_{X}$ and autocorrelation function is
In angle modulation, which of the following two factors limit the value of the modulation index $\beta$?
In which one of the following modulation schemes is the quantizer a 1-bit (two-level) quantizer with magnitudes $\pm\Delta$?
The average probability of bit error in each channel of the coherent QPSK system is (where $E$ and $N_{0}$ are the signal energy and noise spectral density respectively)
Consider the following drawbacks of avalanche photodiodes:
1. Fabrication difficulties due to their more complex structure and hence increased cost.
2. The random nature of the gain mechanism which gives an additional noise contribution.
3. The high bias voltages required particularly for silicon devices (150 to 400 V) which although lower for germanium and InGaAs APDs (20 to 40 V) are similarly wavelength dependent.
Which of the above drawbacks is/are correct?
The current $(I_{2})$ of the circuit given below is
The lithium intercalation reaction in Lithium-ion battery is
The conversion efficiency of fuel cells is approximately
The magnetic core of a transformer is made up of stacks of thin laminations of cold-rolled grain-oriented silicon steel sheets of thickness
A relay which is used in oil-immersed transformers for protection against all kinds of faults, is known as
Consider the following statements:
1. In induction machine, the field winding is placed on the stator and the armature winding on the rotor.
2. In DC machine, the stator windings serve as both armature windings and field windings.
3. In synchronous machine, the rotor carries the field winding and the stator carries the armature winding.
Which of the above statements is/are correct?
Consider the following statements:
1. The coordination number and the atomic packing factor for the Hexagonal Close-Packed (HCP) crystal structure are less than the Body-Centered Cubic (BCC) crystal structure.
2. The coordination number and the atomic packing factor for the Hexagonal Close-Packed (HCP) crystal structure are greater than the Face-Centered Cubic (FCC) crystal structure.
3. The coordination number and the atomic packing factor for the Hexagonal Close-Packed (HCP) crystal structure are equal to the Face-Centered Cubic (FCC) crystal structure.
Which of the above statements is/are not correct?
The equilibrium number of vacancies $N_{v}$ for a given quantity of material
Silicon Carbide (SiC) has
Match the following lists:
| List-I (Composites) | List-II (Sub classification of composites) |
|---|---|
| P. Particle-reinforced composites | 1. Laminates |
| Q. Fiber-reinforced composites | 2. Dispersion strengthened |
| R. Structural composites | 3. Discontinuous (short) |
Select the correct answer using the code given below: