Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, IS Code references, and step-by-step structural calculations across Structural Analysis, Soil Mechanics & Foundation Engineering, Fluid Mechanics & Hydraulics, RCC & Steel Structures, Surveying, Environmental Engineering, and Transportation.
Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).
While taking the stopping sight distance into consideration, when $L > SSD$, then the general equation for length $L$ of the parabolic curve is :
For a street having $15\text{ m}$ width, what is the spacing between lighting units to produce average lux of $6.0$? (Take lamp size as $6000\text{ lumen}$, coefficient of utilization as $0.5$, and maintenance factor as $0.9$)
Match the following lists:
| List-I | List-II |
|---|---|
| P. Cut and Cover | 1. Circular Tunnel |
| Q. Shield Driven | 2. Horseshoe Tunnel |
| R. Sequential Excavation | 3. Rectangular Tunnel |
Select the correct answer using the code given below:
Select the correct order of steps in travel demand modelling :
Match the following lists with corresponding acceptability limits of physical properties of aggregates for Bituminous Macadam construction, that is recommended by the Ministry of Road Transport and Highways specifications for Road and Bridge works:
| List-I | List-II |
|---|---|
| P. Los Angeles abrasion value | 1. $12\%$ maximum |
| Q. Aggregate impact value | 2. $25\%$ maximum |
| R. Soundness loss with sodium sulphate test | 3. $30\%$ maximum |
| S. Aggregate stripping value | 4. $40\%$ maximum |
Select the correct answer using the code given below:
Which one of the following statements is correct regarding Marshall test?
In Indian Railways, the field survey normally covers a width of:
In Indian Railways, the widening of the gauge (extra width) on curves is:
What is the approximate psychological widening required for a pavement of $7\text{ m}$ on a horizontal curve of radius $225\text{ m}$, if the longest wheel base of vehicle expected on the road is $7.0\text{ m}$? (Take the design speed as $70\text{ km/h}$)
As per IRC guidelines, match the following lists:
| List-I | List-II |
|---|---|
| P. Initial walking time for pedestrian | 1. 2.0 seconds |
| Q. Green time required for first vehicle to cross the STOP bar | 2. 2.5 seconds |
| R. Reaction time – Overtaking sight distance | 3. 6.0 seconds |
| S. Reaction time – Stopping sight distance | 4. 7.0 seconds |
Select the correct answer using the code given below:
| Option | P | Q | R | S |
|---|---|---|---|---|
| (a) | 4 | 3 | 1 | 2 |
| (b) | 3 | 4 | 1 | 2 |
| (c) | 3 | 4 | 2 | 1 |
| (d) | 4 | 3 | 2 | 1 |
What is the capacity of the road section, if speed ($V$) – density ($K$) study has resulted in a linear relationship $V = 60 - 0.5K$?
For the spot speed study distribution, $x : N[55,\ 49]$, what is the speed of the next vehicle with a probability of $97.5\%$? (Take equivalent statistic on the standard normal distribution $(z) = 1.96$)
A line $AB$ between the stations $A$ and $B$ was measured as $348\text{ m}$ using a $20\text{ m}$ tape, too short by $0.05\text{ m}$. What is the correct length of $AB$?
A tape of standard length $20\text{ m}$ at $85^{\circ}\text{F}$ was used to measure a base line. The measured distance was $882.50\text{ m}$. What is the true horizontal length of the line, if the mean temperature during measurement was $63^{\circ}\text{F}$ and the coefficient of thermal expansion of the tape material is $6.5 \times 10^{-6}\text{ per }^{\circ}\text{F}$?
With what accuracy must a difference in elevation between two ends of a $30\text{ m}$ tape be known if the difference in the elevation is $3\text{ m}$ and the accuracy ratio is to be at least $1\text{ in } 600000$?
Which one of the following is not correct regarding measurement of distances?
In levelling, what is the combined correction (curvature and refraction) at a distance of $1\text{ km}$?
For setting out a rectangular platform $ABCD$, a rotating construction laser was used. It gave a reading of $0.878\text{ m}$ on a temporary B.M., having a level $45.110\text{ m}$. The lowest corner $A$ has a level $45.30\text{ m}$. The platform has a cross fall of $1\text{ in }1000$ longitudinally and $1\text{ in }250$ transversely. If the platform is $8\text{ m}$ longitudinally, i.e., along $AD$ or $BC$, and $40\text{ m}$ transversely, i.e., along $AB$ or $DC$, what is the offset from the laser beam to the corner $C$ of the platform?
Sight rails are used for setting out :
Location of points by resection requires pointings made on at least:
Consider the length of the curve as $L$ and radius of the curve as $R$. For a transition curve, the shift $S$ of a circular curve is :
A reverse curve consists of:
A parabola is preferred for vertical curves because :
Maximum ordinate on a Mass Haul Diagram occurs:
Consider the following statements regarding anticline and syncline :
Which of the above statements are correct?