UPSC Engineering Services Examination (ESE) Civil Engineering (CE) Paper-II Technical

UPSC ESE Civil Engineering Solved Papers

Prepare for UPSC Indian Engineering Services (IES/ESE) with official previous years' questions, detailed derivations, IS Code references, and step-by-step structural calculations across Structural Analysis, Soil Mechanics & Foundation Engineering, Fluid Mechanics & Hydraulics, RCC & Steel Structures, Surveying, Environmental Engineering, and Transportation.

0%
Score Tracker
Live accuracy rate
0
Correct
0
Wrong
0
Attempted
Filter ESE Civil Engineering Questions

All ESE Civil Engineering Solved Papers / All Technical Domains / All Chapters

Marking pattern: +2.00 positive, -0.66 negative (Official UPSC ESE 1/3rd Negative Marking Scheme; 150 Questions, 300 Marks).

300 Questions Page 6 of 12
126

A $20\text{ cm}$ storm occurred for $6\text{ hrs}$ in a catchment having a $CN$ of $50$. What is the net rainfall using SCS method?

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
127

The sliding factor of a gravity dam is defined as:

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
128

The depths of penetrations along the length of a border strip at points $30\text{ m}$ apart were probed. The observed values are $2.0\text{ m}$, $1.9\text{ m}$, $1.8\text{ m}$, $1.6\text{ m}$ and $1.5\text{ m}$. The water distribution efficiency is:

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
129

Which of the following statements are correct regarding aqueducts?

  1. The choice of a particular type of aqueduct does not depend upon its length.
  2. The selection of a type of aqueduct lies on the considerations of economy.
  3. On a very wide drainage, Type III aqueduct is most economical.
  4. In Type III aqueduct, the width of the aqueduct is minimum but the cost of bank connections is maximum.

Select the correct answer using the code given below:

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
130

A storm with $12.0\text{ cm}$ precipitation produced a direct runoff of $6.8\text{ cm}$. The time distribution of the storm is given in the following Table. What is the $\phi$-index? (Take duration of excess rainfall as $8\text{ hrs}$)

Time from start (hr)Incremental rainfall in each hour (cm)
10.56
20.95
31.90
42.80
52.00
61.80
71.20
80.61
UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
131

Consider the following statements regarding polluted water resources :

  1. If the polluted water is discharged directly to the recipient (such as lakes and rivers) without treatment, it usually leads to serious deterioration of the ecological life in the water body.
  2. The polluted water is usually treated in a sewage treatment plant before it is led to the recipient.

Which of the above statements is/are correct?

UPSC ESE Prelims 2026 Civil Engineering Paper II Environmental Engineering
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
132

In the context of clouds and raindrop formation, which one of the following give the minimum precipitation and are found at great heights (up to $12\text{ kms}$) from the Earth's surface?

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
133

The annual evaporation from a lake with surface area of $1500\text{ hectare}$ is $240\text{ cm}$. What is daily average evaporation rate in $\text{hectare-metre per day}$ during the year?

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
134

In the process of drainage of water through soil during rainfall, the excess water present is called:

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
135

A cyclone formed outside the tropical zone near the boundary between warm and cold air is called:

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
136

Soil materials which have the property to store water due to good number of pores in them, but passage of water through them is not possible, are called:

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
137

Which one of the following is not a type of groyne?

UPSC ESE Prelims 2026 Civil Engineering Paper II Hydrology Irrigation
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
138

A wooden block of rectangular section $1.25\text{ m}$ wide, $2\text{ m}$ deep, $4\text{ m}$ long floats horizontally in sea water. The specific gravity of wood is $0.64$ and water weighs $1000\text{ kg(f)/m}^3$. Under this situation, the position of centre of buoyancy of wood is at :

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
139

A rectangular pontoon is $5\text{ m}$ long, $3\text{ m}$ wide and $1.20\text{ m}$ high. The depth of immersion of the pontoon is $1.0\text{ m}$ in sea water. If the centre of gravity is $0.6\text{ m}$ above the bottom of the pontoon, what is the metacentric height of the same? (Take the density of sea water as $1000\text{ kg/m}^3$)

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
140

What are the vorticity components at a point $(1,\ 1,\ 1)$ for the following flow field?
$u = 2x^2 + 3y$, $v = -2xy + 3y^2 + 3zy$, $w = -1.5z^2 + 2xz - 9y^2z$

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
141

Which of the following correctly depicts the continuity equation in its differential form?

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
142

Which of the following sets of equations represent(s) possible two-dimensional incompressible flows?

  1. $u = x + y$; $v = x - y$
  2. $u = x + 2y$; $v = x^2 - y^2$
  3. $u = 4x + y$; $v = x - y^2$
  4. $u = xt + 2y$; $v = x^2 - yt^2$
  5. $u = xt^2$; $v = xyt - y^2$

Select the correct answer using the code given below:

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
143

A venturimeter having area of $700\text{ cm}^2 \times 150\text{ cm}^2$ is inserted in a vertical pipe carrying water, flowing in the upward direction. A differential manometer connected to the inlet and throat gives a reading of $20\text{ cm}$. What is the approximate discharge by assuming $C_d = 1.0$ and $g = 1000\text{ cm/s}^2$?

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
144

The flow of incompressible fluid is defined by $u = 2$, $v = 8x$. What is the stream function? (where $C = \text{constant}$)

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
145

Water at $60^{\circ}\text{C}$ flows between two large flat plates. The lower plate moves to the left at a speed of $0.3\text{ m/s}$. The plate spacing is $3\text{ mm}$ and the flow is laminar. The pressure gradient required to produce zero net flow at a cross-section is : (Take $\mu = 5 \times 10^{-4}\text{ N}\cdot\text{s/m}^2$ at $60^{\circ}\text{C}$)

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
146

Without velocity of approach, the discharge through a Cipolletti weir is:

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
147

The rate of flow of water through a horizontal pipe is $0.25\text{ m}^3/\text{s}$. The diameter of the pipe which is $200\text{ mm}$ is suddenly enlarged to $400\text{ mm}$. The pressure intensity in the smaller pipe is $11.772\text{ N/cm}^2$. The approximate power lost due to enlargement is: (Take $g = 10\text{ m/s}^2$)

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
148

Water is flowing with a velocity of $1.5\text{ m/s}$ in a pipe of length $2500\text{ m}$ and of diameter $500\text{ mm}$. At the end of the pipe, a valve is provided. What is the rise in pressure, if the valve is closed in $25\text{ seconds}$? (Take the value of $C$ as $1460\text{ m/s}$)

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
149

A Pelton wheel is having a mean bucket speed of $10\text{ m/s}$ with a jet of water flowing at the rate of $700\text{ litre/s}$ under a head of $31.25\text{ m}$. The buckets deflect the jet through an angle of $150^{\circ}$. Assuming co-efficient of velocity as unity, $g$ as $10\text{ m/s}^2$, and the density of water as $1000\text{ kg/m}^3$, the approximate power given by water to the runner of the turbine is:

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles
150

Consider the following statements regarding the operating characteristic curves of centrifugal pumps :

  1. The input power curve will pass through the origin.
  2. The head curve will have maximum value of head when the discharge is maximum.
  3. The output power curve will start from origin.
  4. The efficiency curve will start from origin.

Which of the above statements are correct?

UPSC ESE Prelims 2026 Civil Engineering Paper II Fluid Mechanics
Technical Evaluation
Click an option to analyze
Select an option on the left to reveal the step-by-step structural derivation, equilibrium calculations, and standard IS code references.
Engineering Solution & Design Principles